Magnetic Chuck
Magnetic door-suction

Alnico holding assemblies

Alnico Deep Pot Magnet:

A deep cylindrical permanent magnet assembled concentrically in a mild steel pot with spacer of Aluminum or Copper. These magnets are primarily for gripping applications. Magnet material used is Alnico 5, working temperature is up to 250 °C. North polarity in center of holding face and each magnet has a coated keeper. Outer surface except pole can be red (smooth or wrinkle) painted, or coated with Zinc, Nickel or Chrome.

AlNiCo Deep Pot Magnet
Part No. Dimensions in mm
A B C Holding Force (kg) Weight (kg)
DPM-01-01 9.5 M3 15.1 1.00 0.005
DPM-01-02 12.7 M4 15.9 2.00 0.015
DPM-01-03 17.6 M6 16.0 2.65 0.025
DPM-01-04 20.5 M6 19.0 4.00 0.050
DPM-01-05 27.0 M6 25.0 6.10 0.110
DPM-01-06 35.0 M6 30.0 15.00 0.220
DPM-01-07 65.0 M12 43.0 40.00 1.080
Alnico Shallow Pot Magnet:

Designed for application where height is too restricted for conventional deep pot magnets. A magnet with counter hole assembled in a mild steel pot by spacer or tree points press fixing. Magnet material used is Alnico 5, working temperature is up to 250 °C. North polarity in center of holding face and each magnet has a coated keeper. Outer surface except pole can be red (smooth or wrinkle) painted, or coated with Zinc, Nickel or Chrome.

AlNiCo Shallow Pot Magnet
Part No. Dimensions in mm
A B C Holding force (kg) Weight (kg)
SPM-01-01 19.1 3.7 7.75 3.0 0.013
SPM-01-02 28.6 4.8 8.70 5.0 0.036
SPM-01-03 38.1 4.8 10.6 13.0 0.080
Alnico Magnetic Holdfast:

A range of Pot Magnets for workholding and workhandling where positive grip is required, but not attraction from a distance. Each Holdfast is equipped with a screw down handle because of the exceptionally strong grip of this range of magnets. Magnetic Holdfasts can be used singly or together to make welding and other assembly jigs. Magnet material used is Alnico 5, working temperature is up to 250 °C. North polarity in center of holding face and each magnet has a coated keeper. Outer surface except pole can be red (smooth or wrinkle) painted, or coated with Zinc, Nickel or Chrome.

AlNiCo Magnetic Holdfast
Part No. Dimensions in mm
A B C Fixing hole centers No. of holes Holding force (kg) Weight (kg)
MHF-01-01 44.5 M8 44.5 31.8 2 20 0.55
MHF-01-02 54 M8 50.8 38.1 2 40 0.95
MHF-01-03 70.0 M8 63.5 50.8 2 88 1.95
MHF-01-04 103 M8 74.6 69.1 PCD 3 183 4.70
MHF-02-05 95.3 M8 CUBE 80.3 PCD 8(4 on 2 faces) 214 7.50
Alnico Magnetic Foot:

A rectangular block comprising two pot type magnets set into one mild steel housing. The Magnetic Foot is ideal tool for gripping applications. The mild steel case is suitable for drilling and tapping in most locations. Magnet material used is Alnico 5, working temperature is up to 250 °C. North polarity in center of holding face and each magnet has a coated keeper. Outer surface except pole can be red (smooth or wrinkle) painted.

Part No. Dimensions in mm
A B C D Holding force (kg) Weight (kg)
MFT-01-01 60 25 25 M6 12 0.32

< back >    < next >

 
 
© Since 2004 Yuxiang Magnetic Material Ind. Co.,Ltd. All Rights Reserved
Add: Floor 16, Jinyuan plaza, # 57 South Hubin Road, Xiamen, CHINA 361004
Tel: (86)592 2295387 (86)592 2217138 Fax: (86)592 2207122
Email Address: magnetcom@gmail.com or mag@e-magnet.cn

About Us   Services   Products   Order Tracking   SiteMap  E-Mail  

Magnets Products Suppliers